⬡ WebCAM Pro

Project Units

Stock / base L × W × H Chamfer

Side −XSide +XSide −YSide +YCorner FLCorner FRCorner BLCorner BR

Corner radius

Objects

Mode X Y Z (base) Length X Width Y Height Chamfer Corner radius

Side −XSide +XSide −YSide +YCorner FLCorner FRCorner BLCorner BR

Chamfer top edge

Work offset WCS Preset X / Y / Z

No-machine zones

Center X Center Y Width Height

Face / side selection

No face selected → whole top is machined.

No side faces selected.

Operation Program # Style Type Tool # H offset # Tool Ø Feed /min Plunge /min RPM Safe Z (work) R plane (work) Stock to leave Coolant M08

Stepover % Stepdown Total depth Raster dir Pattern

Stepover % Stepdown

Stepdown Total depth

Peck Q (0=G81)

Center X (work) Center Y (work) PCD Ø Hole Ø No. of holes Start angle ° Hole depth

Pitch

Spot depth

Stepdown

Simulation

Speed

Generate a toolpath first.

G-code output

No program generated yet.